FASTTRAK S150 SX4-M X64 DRIVER

This is valuable when adding drives, or during a rebuild. Stripe Block Size, the default 64KB is best for most applications. The information contained herein is subject More information. To restore fault tolerance as quickly as possible, the FastTrak Controller performs an automatic data rebuild on the spare drive in the background without the need to restart the system. You will see the array defined.

Uploader: Vokinos
Date Added: 5 September 2014
File Size: 24.59 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 73589
Price: Free* [*Free Regsitration Required]

Exit Note This menu uses number keys 1 through 4 to select options.

Promise FastTrak S150 SX4-M – storage controller (RAID) – SATA 1.5Gb/s – PCI/66 MHz Series

Intel Matrix Storage Manager 8. Reorient or relocate the receiving antenna. If you are striping RAID 0 for performance, use up to four new drives. Insert the Promise Technology driver diskette into drive A: April Copyright and Trademarks The information of the product in this manual sz4-m.

Status Shows one of three possible array status conditions: Two items may be useful to the user for troubleshooting The information presented here is as follows:?

To delete an array, highlight the Array you wish to delete and press the Del key. The Windows Setup screen will appear again saying Setup will load support for the following mass storage devices: Note You may choose to attach an unassigned sx4- drive to the FastTrak Controller to act s15 a hot spare replacement see Page Guide de l’utilisateur – fr.

  AIRLIVE PCI 2000 DRIVER DOWNLOAD

FASTTRAK SX4030, SX4060, S150 SX4-M USER MANUAL. Version 1.1

Hp Laserjet 5 Hp Deskjet c c c. You will be creating two pairs of striped drives with identical data on them. Press ESC Escape to exit the menu. Press the Up and Down Arrow keys to highlight the array then press the Spacebar to make it bootable. Consult Promise Technology, Inc. Fasttrwk You cannot change the block size after the array has been created.

FASTTRAK SX, SX, S SX4-M USER MANUAL. Version PDF

Fxsttrak a later time, the failed drive can be physically removed s10 an extra drive added in its place to function as the spare drive. In the Main Menu press 2 to display the Define Array screen see page Phones by Shara Tibken Dec 6, Use the same method of partitioning and formatting on an array as you would any other fixed disk added to your computer system. The system will then use the bootable array as the fixed boot C: Important data protection information You should back up all data before installing any drive controller or storage peripheral.

  BROTHER J6920 DRIVER

When prompted, press Ctrl-F to enter the FastBuild utility. RAID 1 arrays use two disk drives. X150 tasks are not intended to be a complete, step-by-step guide to setting up the FastTrak system successfully. No part of this manual may be. Also included are four levels of notices: Note A Note provides helpful information such as hints or alternative ways of doing a task.

See page 14 for status definitions. Press the up and down arrow keys to hhighlight the desired fasttrk and press the Spacebar. Other drivers most commonly associated with Promise Fasttrak S Sx4-m problems: Copyright by Promise Technology, Inc.

When the New Hardware Wizard appears, select Install from a list or specific location advanced and click Next. Under Select the device driver you want to install, click Next.